Precision machined from hardened stainless steel with a patented design, our quick-change Orange Ball Couplers™
unlock unseen productivity and potential in most machine shops.
Couplers thread into the underside of a fixture plate or Orange Vise™, just like the pull studs of a zero-point system,
simplifying preparation by only requiring one-side machining.
Couplers remain semi-permenantly attached to the fixture for higher accuracy and are self-compensating for preparation
error and fixture thickness.
The idea behind our low cost system isn't just to save you money, but also to provide financially-feasible way to
implement a universal quick-change system across your entire shop.
Note: Actual product appearance may differ slightly from photo.
|Nominal Diameter:||1.5"||Nominal OD:||3.0"|
|Thread Size:||1.25"-12 tpi||Nominal ID:||1.5"|
|Bore Depth:||0.375"||Bore Depth:||0.625"|
|Thread Depth:||0.8125"||Screw:||5/16"-18 x 5/8"|
|Lower Hex Size:||3/4"||Bolt Circle:||QTY 6 @ 2.313" BC|
|Mounting Torque:||60 ft-lbs||Mounting Torque:||10 ft-lbs|
|Usage Notes: Do not exceed 15 lbs-ft when tightening the coupler|